Perforator Crowns

Packing of cafeteria
♪
The separation of the bathroom walls with the ceramic plug has many advantages over the way the walls are painted or the ocular is painted.
The stove has excellent hygiene properties. It's easy to wash, it's not afraid of cleaning. It doesn't support the spread of moulds and mushrooms.
The ceramic stove is not afraid of high temperature and humidity. Even a direct fall of water on the walls scattered by the stove will have no effect.
The plug has high decorative qualities, so you can always pick the right colour and drawing for repair.
It's also good for the stoves. For many years, the stove is capable of retaining its per person. Sometimes if you need to wipe her wet soap soap soap to wash the dust.
As you can see, the pros of the ceramic stove to other types of separate materials are quite large. But there's one significant minus. The stove laying requires some experience in such works and is the most difficult and expensive form of separation of the bathroom walls.
Let's see how to put a stick on the bathroom walls a step by step.
Preparation of walls for the stove
Before moving directly to the café, the walls should be prepared.
Typically, the preparation of walls is limited to the removal of the old paint, the cap and the application of the ground for a better clutch clutch to the surface of the walls.
The old paint can be removed in different ways. A special chemical or mechanical means may be used for this purpose, a sliph machine, a perforator, an electrode.
After the surface is purified from the old paint, cracks and splinters should be made if they are in the brick.
Don't forget the hydroisolation of the bathroom!
Fractures can be wrapped with a stiff scapula where necessary.
Only after the hat can completely dry the walls.
Cylinder preparation
Once the surface of the wall is prepared for the ceramic stove, it can be converted to the cage preparation.
For this, dry mixtures are used specifically for the preparation of a solution to which the stove is adhesive. When you buy a dry mixture, don't forget to make sure it's suitable for the cage to be made for the stove in... ♪

Clothing
Before we start laying the cafeteria, we need to figure out the stove. Typically, the walls of the bathroom are separated by a rectangular plate with a long side parallel to the walls. Such a stove orientation would visually increase the ceiling, which is important for making the bathroom and the sanusle in a modern, small apartment.
But you can choose the stove orientation you like. In addition, decoration boxes should be taken into account if you use them to separate walls as well as brodures.
As a rule, the first row of stoves begins to be placed not from the floor, but from a flat horizontal line at the height of the second or third row. This is related to the fact that the floor does not always have an absolute flat surface and that when the first row is laid on the floor, further rows may not be uniform.
In addition, sewer pipes are often located on the floor, which prevent the first row from being removed even with an ideal horizontal surface.
For the first row, therefore, the wall should be marked with a hydraulic level and the metal profile for the hipposcoartone or other level reference support should be reinforced by marking the first row of the cable.
It is desirable that the first row be placed at a height that leaves it to the ceiling with a flat number of stoves without a cut. If a suspension ceiling is planned from the pitch panels, a tension ceiling or aluminium rivers, it will not be as principled as the top edge of the stove will be hidden behind a false ceiling.
Work starts often on the basis of the first row of the bathboard adjacent to the wall. In this case, the bathboard is glued with painted scotch to prevent damage to the stove and begins to put glue on the wall.
The glue shall be affixed by a direct stack (kelma) to a small area sufficient for 2-3 stoves. The thickness of the layer of the plug shall be 5-7 mm. The layer is stretched by a burial spat.