Chulif Circle For Bulgarian
Among the construction instruments, Bulgarians are rooted in their universality. Changed the board-- and the cutting instrument turned into a bluff. By virtue of any type of work in which a rotary movement is required. We'll deal with the assortment and the assignment of one category of landing, the sliphical circle.
Diamond Circles for cutting
Bulgons are divided by shape, thickness, diameter, material and divided into four groups:
- Pool and sliphonic;
- for the tip;
- I don't know.
The most extensive and widely used group is cut-off discs. Most of the supplies are for wood, stone, metal, diamonds. The instrument transponder may be between 115 and 230 mm, thickness 1 to 3, 2 mm, the greater diameter, the thickness of the disc. Special abrasions shall be placed on the rocking surface of the instrument. It is desirable to use wood and metal panels together with a device for the fixed installation of the Bulgarian, or work may cost a few fingers. It's preferable to work with petty CDs.
Diamond cuts all materials, usually used during the ceramogrene, café, ironbeth. The size of the diamond circle may be swallowed or complete, and the size of the diamond pieces is bigger or smaller.
Each disc contains recommendations for use. While it is more financially cost-effective to acquire a universal instrument, its productivity will be less than specialized.
Sliphoid and politician circles
The following types of work are carried out in sliphony:
- Elimination of rust;
- I don't know.
This is the largest group of landings that can be:
- with shifted rounds of slurry;
- with purified surface;